'The Eclipse' from Llecwedd slate quarry.
Converted from a Bagnall 0-4-0ST in 1927 this electric loco was used in the quarry to shunt slate on the levels. It survived the closure of the quarry to be displayed at Llechwedd Slate Museum.
Kit assembles into a rolling model. Kit is etched in nickel silver and includes chassis, body with overlays for rivet detail, wheels included. Lost wax castings are provided for trolley poles, etc. No provision is made for motorising this model.
4mm kit £39.50.
To complete needs solder/adhesive, paint and transfers.
Wickham Trolleys
These diminutive trolleys were supplied to many narrow gauge railways across the world. Our trolley kits can be assembled for narrow gauge as well as standard gauge.
For details of our Wickham Trolley kits click 4mm Loco Kits.
Coaches of the Glyn Valley Tramway
The bodies of these kits are a single etch and to assemble only require folding at the corners and a joint made in the middle of one end. Kits will make a GVT coach or a typical narrow gauge coach with matchboard sides.
|
|
GVT 3rd class coach
Kit for the GVT coach with centre door and longitudinal seating. Etched in brass the body folds into a rigid box with overlays for the paneling. Floor, chassis and seating are a separate unit. Wheels included.
4mm kit £11.50.
To complete needs couplings, solder/adhesive, paint and transfers.
|
|
GVT 3rd class coach
Kit for the GVT coach with open sides, two doors and cross seating. Etched in brass the body folds into a rigid box with overlays for the paneling. Floor chassis and seating are a separate unit. Wheels included.
4mm kit £11.50.
To complete needs couplings, solder/adhesive, paint and transfers.
Steel Trestle Bridge
Build an impressive steel trestle based on a prototype in Austria.
|
|
Steel Trestle Modules
Build an impressive steel trestle. Height and length can be varied and the bridge can be built for a straight and/or curved location. Each module consists of etched brass parts which slot and tab into each other. Comes with detailed assembly diagrams.
The Modules
Deck girder module - 83mm long, 9mm high. (Not inc. track support timbers, walkway and handrails.)
Trestle module - assembles into two 60mm high A frames.
Trestle extension - increases trestle height by 58mm. A trestle can be built with a maximum height of 234mm.
4mm modules £6.50 each.
To complete needs track support timbers, walkway timber, handrails, solder/adhesive and paint.
|
|
|
|
